1. Roster Size - For some reason is is very difficult to enter a Roster. The Min keeps increasing as I add my New Positions. I want a Total Max of 18. However, as I add New Positions and keep the Min = Max for each Position, it keeps increasing the Min. For example, I want to have the following Max. Should I not set the Min = Max?
2 QB
4 RB
4 WR
2 TE
2 K
2 ST/D
I would assume that I need to keep the Mins the same as above. Yet as I add each of those new Positions above, my Min increases from 18 to xxx
2. Taxi Squad - I want to add a Taxi Squad of 4. However, when I do a Mock Draft, it does not allow ne to draft players to the Taxi Squad
I'm still learning myself, but think I can help on these. First on #2, you can't draft players directly onto the Taxi Squad or IR. Also note that what I have seen is that in the Mock Drafts, players marked as Keepers on Taxi Squads are shown as available to be drafted. This does not happen in the real draft thankfully.
As for #1, the Min is the least amount of that position that you want players to have on their roster. Typically this would equal whatever your # of starters is for each position. The max is the most of each position anyone can have on their rosters. So you should not set Min = Max. If you want 2 starting RB's and you set Min and Max both to 4, that means everyone has to have 4 RB's on their roster and can't have less than that or greater than that. The one piece of information I didn't see above is how many starters you want. I'll assume standard setup of 1 QB, 2 RB, 2 WR, 1 TE, 1 K, 1 ST/D, 1 Flex. So you would set the min for each position to those numbers (no Min for flex because it can be multiple positions). You set Bench to 9, which gives your total of 18 Active Roster spots. You don't actually set the # of Bench players. You set the total # of Active Roster spots. You do this by Editing the very bottom row of the Roster Requirements screen. You've already set your 9 starters, so when you set your total Active Roster to 18, that will leave you 9 Bench spots. Only set the Max for each position if you want to limit how many of those positions each team can have.
Try this out and respond if you have questions or something wasn't clear.
Whitey50Mon 8/16/21 8:10 AM
Hi, I have 2 Issues:
1. Roster Size - For some reason is is very difficult to enter a Roster. The Min keeps increasing as I add my New Positions. I want a Total Max of 18. However, as I add New Positions and keep the Min = Max for each Position, it keeps increasing the Min. For example, I want to have the following Max. Should I not set the Min = Max?
2 QB
4 RB
4 WR
2 TE
2 K
2 ST/D
I would assume that I need to keep the Mins the same as above. Yet as I add each of those new Positions above, my Min increases from 18 to xxx
2. Taxi Squad - I want to add a Taxi Squad of 4. However, when I do a Mock Draft, it does not allow ne to draft players to the Taxi Squad
GlynnRTue 8/17/21 3:19 PM
I'm still learning myself, but think I can help on these. First on #2, you can't draft players directly onto the Taxi Squad or IR. Also note that what I have seen is that in the Mock Drafts, players marked as Keepers on Taxi Squads are shown as available to be drafted. This does not happen in the real draft thankfully.
As for #1, the Min is the least amount of that position that you want players to have on their roster. Typically this would equal whatever your # of starters is for each position. The max is the most of each position anyone can have on their rosters. So you should not set Min = Max. If you want 2 starting RB's and you set Min and Max both to 4, that means everyone has to have 4 RB's on their roster and can't have less than that or greater than that. The one piece of information I didn't see above is how many starters you want. I'll assume standard setup of 1 QB, 2 RB, 2 WR, 1 TE, 1 K, 1 ST/D, 1 Flex. So you would set the min for each position to those numbers (no Min for flex because it can be multiple positions). You set Bench to 9, which gives your total of 18 Active Roster spots. You don't actually set the # of Bench players. You set the total # of Active Roster spots. You do this by Editing the very bottom row of the Roster Requirements screen. You've already set your 9 starters, so when you set your total Active Roster to 18, that will leave you 9 Bench spots. Only set the Max for each position if you want to limit how many of those positions each team can have.
Try this out and respond if you have questions or something wasn't clear.
Whitey50Fri 8/20/21 8:31 AM
Thx for the Response! Much Appreciated.